Convolutional Neural Networks

Project: Write an Algorithm for a Dog Identification App


In this notebook, some template code has already been provided for you, and you will need to implement additional functionality to successfully complete this project. You will not need to modify the included code beyond what is requested. Sections that begin with '(IMPLEMENTATION)' in the header indicate that the following block of code will require additional functionality which you must provide. Instructions will be provided for each section, and the specifics of the implementation are marked in the code block with a 'TODO' statement. Please be sure to read the instructions carefully!

Note: Once you have completed all of the code implementations, you need to finalize your work by exporting the Jupyter Notebook as an HTML document. Before exporting the notebook to html, all of the code cells need to have been run so that reviewers can see the final implementation and output. You can then export the notebook by using the menu above and navigating to File -> Download as -> HTML (.html). Include the finished document along with this notebook as your submission.

In addition to implementing code, there will be questions that you must answer which relate to the project and your implementation. Each section where you will answer a question is preceded by a 'Question X' header. Carefully read each question and provide thorough answers in the following text boxes that begin with 'Answer:'. Your project submission will be evaluated based on your answers to each of the questions and the implementation you provide.

Note: Code and Markdown cells can be executed using the Shift + Enter keyboard shortcut. Markdown cells can be edited by double-clicking the cell to enter edit mode.

The rubric contains optional "Stand Out Suggestions" for enhancing the project beyond the minimum requirements. If you decide to pursue the "Stand Out Suggestions", you should include the code in this Jupyter notebook.


Why We're Here

In this notebook, you will make the first steps towards developing an algorithm that could be used as part of a mobile or web app. At the end of this project, your code will accept any user-supplied image as input. If a dog is detected in the image, it will provide an estimate of the dog's breed. If a human is detected, it will provide an estimate of the dog breed that is most resembling. The image below displays potential sample output of your finished project (... but we expect that each student's algorithm will behave differently!).

Sample Dog Output

In this real-world setting, you will need to piece together a series of models to perform different tasks; for instance, the algorithm that detects humans in an image will be different from the CNN that infers dog breed. There are many points of possible failure, and no perfect algorithm exists. Your imperfect solution will nonetheless create a fun user experience!

The Road Ahead

We break the notebook into separate steps. Feel free to use the links below to navigate the notebook.

  • Step 0: Import Datasets
  • Step 1: Detect Humans
  • Step 2: Detect Dogs
  • Step 3: Create a CNN to Classify Dog Breeds (from Scratch)
  • Step 4: Create a CNN to Classify Dog Breeds (using Transfer Learning)
  • Step 5: Write your Algorithm
  • Step 6: Test Your Algorithm

Step 0: Import Datasets

Make sure that you've downloaded the required human and dog datasets:

Note: if you are using the Udacity workspace, you DO NOT need to re-download these - they can be found in the /data folder as noted in the cell below.

  • Download the dog dataset. Unzip the folder and place it in this project's home directory, at the location /dog_images.

  • Download the human dataset. Unzip the folder and place it in the home directory, at location /lfw.

Note: If you are using a Windows machine, you are encouraged to use 7zip to extract the folder.

In the code cell below, we save the file paths for both the human (LFW) dataset and dog dataset in the numpy arrays human_files and dog_files.

In [1]:
import numpy as np
from glob import glob

# load filenames for human and dog images
human_files = np.array(glob("/data/lfw/*/*"))
dog_files = np.array(glob("/data/dog_images/*/*/*"))

# print number of images in each dataset
print('There are %d total human images.' % len(human_files))
print('There are %d total dog images.' % len(dog_files))
There are 13233 total human images.
There are 8351 total dog images.

Step 1: Detect Humans

In this section, we use OpenCV's implementation of Haar feature-based cascade classifiers to detect human faces in images.

OpenCV provides many pre-trained face detectors, stored as XML files on github. We have downloaded one of these detectors and stored it in the haarcascades directory. In the next code cell, we demonstrate how to use this detector to find human faces in a sample image.

In [2]:
import cv2                
import matplotlib.pyplot as plt                        
%matplotlib inline                               

# extract pre-trained face detector
face_cascade = cv2.CascadeClassifier('haarcascades/haarcascade_frontalface_alt.xml')

for i in [55, 1005, 1302]:
    # load color (BGR) image
    img = cv2.imread(human_files[i])
    # convert BGR image to grayscale
    gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)

    # find faces in image
    faces = face_cascade.detectMultiScale(gray)

    # print number of faces detected in the image
    print('Number of faces detected:', len(faces))

    # get bounding box for each detected face
    for (x,y,w,h) in faces:
        # add bounding box to color image
        cv2.rectangle(img,(x,y),(x+w,y+h),(255,0,0),2)

    # convert BGR image to RGB for plotting
    cv_rgb = cv2.cvtColor(img, cv2.COLOR_BGR2RGB)

    # display the image, along with bounding box
    plt.imshow(cv_rgb)
    plt.show()
Number of faces detected: 1
Number of faces detected: 1
Number of faces detected: 1

Before using any of the face detectors, it is standard procedure to convert the images to grayscale. The detectMultiScale function executes the classifier stored in face_cascade and takes the grayscale image as a parameter.

In the above code, faces is a numpy array of detected faces, where each row corresponds to a detected face. Each detected face is a 1D array with four entries that specifies the bounding box of the detected face. The first two entries in the array (extracted in the above code as x and y) specify the horizontal and vertical positions of the top left corner of the bounding box. The last two entries in the array (extracted here as w and h) specify the width and height of the box.

Write a Human Face Detector

We can use this procedure to write a function that returns True if a human face is detected in an image and False otherwise. This function, aptly named face_detector, takes a string-valued file path to an image as input and appears in the code block below.

In [3]:
# returns "True" if face is detected in image stored at img_path
def face_detector(img_path):
    img = cv2.imread(img_path)
    gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
    faces = face_cascade.detectMultiScale(gray)
    return len(faces) > 0

(IMPLEMENTATION) Assess the Human Face Detector

Question 1: Use the code cell below to test the performance of the face_detector function.

  • What percentage of the first 100 images in human_files have a detected human face?
  • What percentage of the first 100 images in dog_files have a detected human face?

Ideally, we would like 100% of human images with a detected face and 0% of dog images with a detected face. You will see that our algorithm falls short of this goal, but still gives acceptable performance. We extract the file paths for the first 100 images from each of the datasets and store them in the numpy arrays human_files_short and dog_files_short.

Answer: (You can print out your results and/or write your percentages in this cell)

In [4]:
from tqdm import tqdm

human_files_short = human_files[:100]
dog_files_short = dog_files[:100]

#-#-# Do NOT modify the code above this line. #-#-#
face_human_cnt, face_dog_cnt = 0, 0
## TODO: Test the performance of the face_detector algorithm 
## on the images in human_files_short and dog_files_short.
for file_id in tqdm(range(100)):
    if face_detector(human_files_short[file_id]): face_human_cnt += 1
    if face_detector(dog_files_short[file_id]): face_dog_cnt += 1
print(f"Faces correctly detected in Human dataset: {face_human_cnt}% and \n\
Faces inaccurately detected in Dog dataset: {face_dog_cnt}%")
100%|██████████| 100/100 [00:32<00:00,  3.04it/s]
Faces correctly detected in Human dataset: 98% and 
Faces inaccurately detected in Dog dataset: 17%

We suggest the face detector from OpenCV as a potential way to detect human images in your algorithm, but you are free to explore other approaches, especially approaches that make use of deep learning :). Please use the code cell below to design and test your own face detection algorithm. If you decide to pursue this optional task, report performance on human_files_short and dog_files_short.

In [ ]:
### (Optional) 
### TODO: Test performance of anotherface detection algorithm.
### Feel free to use as many code cells as needed.

Step 2: Detect Dogs

In this section, we use a pre-trained model to detect dogs in images.

Obtain Pre-trained VGG-16 Model

The code cell below downloads the VGG-16 model, along with weights that have been trained on ImageNet, a very large, very popular dataset used for image classification and other vision tasks. ImageNet contains over 10 million URLs, each linking to an image containing an object from one of 1000 categories.

In [5]:
import torch
import torchvision.models as models

# define VGG16 model
VGG16 = models.vgg16(pretrained=True)

# check if CUDA is available
use_cuda = torch.cuda.is_available()

# move model to GPU if CUDA is available
if use_cuda:
    VGG16 = VGG16.cuda()
Downloading: "https://download.pytorch.org/models/vgg16-397923af.pth" to /root/.torch/models/vgg16-397923af.pth
100%|██████████| 553433881/553433881 [00:04<00:00, 113373168.75it/s]

Given an image, this pre-trained VGG-16 model returns a prediction (derived from the 1000 possible categories in ImageNet) for the object that is contained in the image.

(IMPLEMENTATION) Making Predictions with a Pre-trained Model

In the next code cell, you will write a function that accepts a path to an image (such as 'dogImages/train/001.Affenpinscher/Affenpinscher_00001.jpg') as input and returns the index corresponding to the ImageNet class that is predicted by the pre-trained VGG-16 model. The output should always be an integer between 0 and 999, inclusive.

Before writing the function, make sure that you take the time to learn how to appropriately pre-process tensors for pre-trained models in the PyTorch documentation.

In [6]:
from PIL import Image
import torchvision.transforms as transforms

def VGG16_predict(img_path):
    '''
    Use pre-trained VGG-16 model to obtain index corresponding to 
    predicted ImageNet class for image at specified path
    
    Args:
        img_path: path to an image
        
    Returns:
        Index corresponding to VGG-16 model's prediction
    '''
    
    ## TODO: Complete the function.
    ## Load and pre-process an image from the given img_path
    ## Return the *index* of the predicted class for that image
    img = Image.open(img_path).convert('RGB')
    transform = transforms.Compose([transforms.Resize(size=(224,224)),
                                    transforms.ToTensor(),
                                    transforms.Normalize(mean=[0.485, 0.456, 0.406],
                                                        std=[0.229, 0.224, 0.225])])

    image = transform(img)[:3,:,:].unsqueeze(0)

    if use_cuda:
        image = image.cuda()
        
    results = VGG16(image)
    
    _, pred_ind = torch.max(results, 1)
    
    return pred_ind.item() # predicted class index

(IMPLEMENTATION) Write a Dog Detector

While looking at the dictionary, you will notice that the categories corresponding to dogs appear in an uninterrupted sequence and correspond to dictionary keys 151-268, inclusive, to include all categories from 'Chihuahua' to 'Mexican hairless'. Thus, in order to check to see if an image is predicted to contain a dog by the pre-trained VGG-16 model, we need only check if the pre-trained model predicts an index between 151 and 268 (inclusive).

Use these ideas to complete the dog_detector function below, which returns True if a dog is detected in an image (and False if not).

In [7]:
### returns "True" if a dog is detected in the image stored at img_path
def dog_detector(img_path):
    ## TODO: Complete the function.
    result = VGG16_predict(img_path)    
    return result >= 151 and result <= 268  # true/false

(IMPLEMENTATION) Assess the Dog Detector

Question 2: Use the code cell below to test the performance of your dog_detector function.

  • What percentage of the images in human_files_short have a detected dog?
  • What percentage of the images in dog_files_short have a detected dog?

Answer: 1. 1% of human images were detected as dogs in human_files_short.

2. 100% of dog images were detected as dogs in dog_files_short.

In [8]:
### TODO: Test the performance of the dog_detector function
### on the images in human_files_short and dog_files_short.
from tqdm import tqdm

human_files_short = human_files[:100]
dog_files_short = dog_files[:100]

#-#-# Do NOT modify the code above this line. #-#-#
human_cnt, dog_cnt = 0, 0
## TODO: Test the performance of the face_detector algorithm 
## on the images in human_files_short and dog_files_short.
for file_id in tqdm(range(100)):
    if dog_detector(human_files_short[file_id]): human_cnt += 1
    if dog_detector(dog_files_short[file_id]): dog_cnt += 1
print(f"Dogs inaccurately detected in Human dataset: {human_cnt}% and \n\
Dogs correctly detected in Dog dataset: {dog_cnt}%")
100%|██████████| 100/100 [00:07<00:00, 14.51it/s]
Dogs inaccurately detected in Human dataset: 1% and 
Dogs correctly detected in Dog dataset: 100%

We suggest VGG-16 as a potential network to detect dog images in your algorithm, but you are free to explore other pre-trained networks (such as Inception-v3, ResNet-50, etc). Please use the code cell below to test other pre-trained PyTorch models. If you decide to pursue this optional task, report performance on human_files_short and dog_files_short.

In [ ]:
### (Optional) 
### TODO: Report the performance of another pre-trained network.
### Feel free to use as many code cells as needed.

Step 3: Create a CNN to Classify Dog Breeds (from Scratch)

Now that we have functions for detecting humans and dogs in images, we need a way to predict breed from images. In this step, you will create a CNN that classifies dog breeds. You must create your CNN from scratch (so, you can't use transfer learning yet!), and you must attain a test accuracy of at least 10%. In Step 4 of this notebook, you will have the opportunity to use transfer learning to create a CNN that attains greatly improved accuracy.

We mention that the task of assigning breed to dogs from images is considered exceptionally challenging. To see why, consider that even a human would have trouble distinguishing between a Brittany and a Welsh Springer Spaniel.

Brittany Welsh Springer Spaniel

It is not difficult to find other dog breed pairs with minimal inter-class variation (for instance, Curly-Coated Retrievers and American Water Spaniels).

Curly-Coated Retriever American Water Spaniel

Likewise, recall that labradors come in yellow, chocolate, and black. Your vision-based algorithm will have to conquer this high intra-class variation to determine how to classify all of these different shades as the same breed.

Yellow Labrador Chocolate Labrador Black Labrador

We also mention that random chance presents an exceptionally low bar: setting aside the fact that the classes are slightly imabalanced, a random guess will provide a correct answer roughly 1 in 133 times, which corresponds to an accuracy of less than 1%.

Remember that the practice is far ahead of the theory in deep learning. Experiment with many different architectures, and trust your intuition. And, of course, have fun!

(IMPLEMENTATION) Specify Data Loaders for the Dog Dataset

Use the code cell below to write three separate data loaders for the training, validation, and test datasets of dog images (located at dog_images/train, dog_images/valid, and dog_images/test, respectively). You may find this documentation on custom datasets to be a useful resource. If you are interested in augmenting your training and/or validation data, check out the wide variety of transforms!

In [9]:
import os
from torchvision import datasets, transforms
from PIL import ImageFile
ImageFile.LOAD_TRUNCATED_IMAGES = True

### TODO: Write data loaders for training, validation, and test sets
## Specify appropriate transforms, and batch_sizes

use_cuda = torch.cuda.is_available()

data_dir = '/data/dog_images/'
train_dir = os.path.join(data_dir, 'train/')
valid_dir = os.path.join(data_dir, 'valid/')
test_dir = os.path.join(data_dir, 'test/')

batch_size = 64
num_workers = 0

transform = transforms.Compose([transforms.Resize(size=(224,224)),
                                transforms.RandomRotation(45),
                                transforms.RandomHorizontalFlip(),
                                transforms.RandomVerticalFlip(),
                                transforms.ToTensor(),
                                transforms.Normalize(mean=[0.485, 0.456, 0.406], 
                                                     std=[0.229, 0.224, 0.225])
                               ])

train = datasets.ImageFolder(train_dir, transform = transform)
test = datasets.ImageFolder(test_dir, transform = transform)
valid = datasets.ImageFolder(valid_dir, transform = transform)

train_data_loader = torch.utils.data.DataLoader(train,
                                          batch_size=batch_size,
                                          shuffle=True,
                                          num_workers=num_workers)
test_data_loader = torch.utils.data.DataLoader(test,
                                          batch_size=batch_size,
                                          shuffle=True,
                                          num_workers=num_workers)
valid_data_loader = torch.utils.data.DataLoader(valid,
                                          batch_size=batch_size,
                                          shuffle=True,
                                          num_workers=num_workers)

loaders_scratch = {'train': train_data_loader, 
                  'test':test_data_loader,
                  'valid':valid_data_loader}

Question 3: Describe your chosen procedure for preprocessing the data.

  • How does your code resize the images (by cropping, stretching, etc)? What size did you pick for the input tensor, and why?
  • Did you decide to augment the dataset? If so, how (through translations, flips, rotations, etc)? If not, why not?

Answer: 1. The images were resized into 224 by 224 pixel size using the tarnsforms.Resize() because the torchvision.model architectures like VGG16 used the size 224 by 224. In addition, after coverting them into tensor format, each of the channels were normalized with their corresponding mean ([0.485, 0.456, 0.406]) and standard deviation ([0.229, 0.224, 0.225]) values.

2. For data augmentation, I chose random image rotation with of 45 degrees using transforms.RandomRotation() and two random flips, one horizonatl and one vertical using transforms.RandomHorizontalFlip() and transforms.RandomVerticalFlip(). Data augmentation was used for better data generalization and improve performancce with the test images. I had the accuracy of only 9% with only rotation so I added the flips too.

(IMPLEMENTATION) Model Architecture

Create a CNN to classify dog breed. Use the template in the code cell below.

In [10]:
import torch.nn as nn
import torch.nn.functional as F

# define the CNN architecture
class Net(nn.Module):
    ### TODO: choose an architecture, and complete the class
    def __init__(self):
        super(Net, self).__init__()
        ## Define layers of a CNN
        # 224x224x3 -> conv layer -> 112x112x32 -> gets pooled -> 56x56x32
        self.conv1 = nn.Conv2d(in_channels=3, out_channels=32, kernel_size=3, stride = 2, padding= 1)
        # 56x56x32 -> conv layer -> 28x28x64 -> gets pooled -> 14x14x64
        self.conv2 = nn.Conv2d(in_channels=32, out_channels=64, kernel_size=3, stride = 2, padding= 1)
        # 14x14x64 -> conv layer -> 14x14x128 -> gets pooled -> 7x7x128
        self.conv3 = nn.Conv2d(in_channels=64, out_channels=128, kernel_size=3, padding= 1) 
        self.pool = nn.MaxPool2d(2, 2)   
        self.fc1 = nn.Linear(7*7*128, 512)
        self.fc2 = nn.Linear(512, 133)
        self.dropout = nn.Dropout(0.3)        
        
    
    def forward(self, x):
        ## Define forward behavior
        x = self.pool(F.relu(self.conv1(x)))   
        x = self.pool(F.relu(self.conv2(x)))   
        x = self.pool(F.relu(self.conv3(x))) 

        x = x.view(x.size(0), -1)
        x = self.dropout(x)
        x = F.relu((self.fc1(x)))
        x = self.dropout(x)
        x = F.relu(self.fc2(x))
        return x

#-#-# You so NOT have to modify the code below this line. #-#-#

# instantiate the CNN
model_scratch = Net()

# move tensors to GPU if CUDA is available
if use_cuda:
    model_scratch.cuda()

Question 4: Outline the steps you took to get to your final CNN architecture and your reasoning at each step.

Answer: As discussed before, the input image is resized to 224 by 244 and have 3 channes RGB and the output classes are 133 dog breeds. So the input batch for the first convolution layer was of size (3, 224, 224) and the input channel for first convolution was 3 and the output of the CNN (of last fully connected layer) is 133. Initially, I had added 5 convolution layers with output channels 32, 64, 128, 256 and 512 but due to high training time, I decided to use only 3 layers.

The CNN architecture consists of 3 2D convolution layers of out channels 32, 64 and 128 respectively and 2 fully connected layers with input features of 77128 and 512 respectively. I used the filter size of 3 by 3 with stride of 2 and padding of 1. The padding was used to include border pixels of the image. The 2D max pooling of kernel of 2 and stride 2 halved the fetaure maps. The output size was calculated using the folowing formla :outputsize = (input width - filter size + 2 * padding size)/stride + 1. In forward method, the convolution layer was applied with RelU activationa and maxpooled to reduce the dimension and the flattened image input was used in the fully connected layers. The dropout layer was also applied to decrease overfitting and increase generalization.

(IMPLEMENTATION) Specify Loss Function and Optimizer

Use the next code cell to specify a loss function and optimizer. Save the chosen loss function as criterion_scratch, and the optimizer as optimizer_scratch below.

In [11]:
import torch.optim as optim

### TODO: select loss function
criterion_scratch = nn.CrossEntropyLoss()

### TODO: select optimizer
optimizer_scratch = optim.SGD(model_scratch.parameters(), lr=0.01, momentum=0.9)

(IMPLEMENTATION) Train and Validate the Model

Train and validate your model in the code cell below. Save the final model parameters at filepath 'model_scratch.pt'.

In [12]:
def train(n_epochs, loaders, model, optimizer, criterion, use_cuda, save_path):
    """returns trained model"""
    # initialize tracker for minimum validation loss
    valid_loss_min = np.Inf 
    
    for epoch in range(1, n_epochs+1):
        # initialize variables to monitor training and validation loss
        train_loss = 0.0
        valid_loss = 0.0
        
        ###################
        # train the model #
        ###################
        model.train()
        for batch_idx, (data, target) in enumerate(loaders['train']):
            # move to GPU
            if use_cuda:
                data, target = data.cuda(), target.cuda()
            ## find the loss and update the model parameters accordingly
            
            optimizer.zero_grad()
            outputs = model(data)
            loss=criterion(outputs, target)
            loss.backward()
            optimizer.step()
            
            ## record the average training loss, using something like
            train_loss = train_loss + ((1 / (batch_idx + 1)) * (loss.data - train_loss))
   
        ######################    
        # validate the model #
        ######################
        model.eval()
        for batch_idx, (data, target) in enumerate(loaders['valid']):
            # move to GPU
            if use_cuda:
                data, target = data.cuda(), target.cuda()
            ## update the average validation loss
            valid_loss = valid_loss + ((1 / (batch_idx + 1)) * (loss.data - valid_loss))
            
        # print training/validation statistics 
        print('Epoch: {} \tTraining Loss: {:.6f} \tValidation Loss: {:.6f}'.format(
            epoch, 
            train_loss,
            valid_loss
            ))
        
        ## TODO: save the model if validation loss has decreased
        if valid_loss < valid_loss_min:
            torch.save(model.state_dict(), save_path)
            valid_loss_min = valid_loss
    # return trained model
    return model


# train the model
model_scratch = train(30, loaders_scratch, model_scratch, optimizer_scratch, 
                      criterion_scratch, use_cuda, 'model_scratch.pt')

# load the model that got the best validation accuracy
model_scratch.load_state_dict(torch.load('model_scratch.pt'))
Epoch: 1 	Training Loss: 4.886106 	Validation Loss: 4.897776
Epoch: 2 	Training Loss: 4.843579 	Validation Loss: 4.817463
Epoch: 3 	Training Loss: 4.758484 	Validation Loss: 4.628445
Epoch: 4 	Training Loss: 4.663523 	Validation Loss: 4.425946
Epoch: 5 	Training Loss: 4.565940 	Validation Loss: 4.600805
Epoch: 6 	Training Loss: 4.486592 	Validation Loss: 4.087800
Epoch: 7 	Training Loss: 4.432174 	Validation Loss: 4.547235
Epoch: 8 	Training Loss: 4.357419 	Validation Loss: 4.134542
Epoch: 9 	Training Loss: 4.295769 	Validation Loss: 4.481449
Epoch: 10 	Training Loss: 4.220582 	Validation Loss: 4.446540
Epoch: 11 	Training Loss: 4.166249 	Validation Loss: 4.236500
Epoch: 12 	Training Loss: 4.108345 	Validation Loss: 3.911365
Epoch: 13 	Training Loss: 4.042917 	Validation Loss: 3.922203
Epoch: 14 	Training Loss: 3.992997 	Validation Loss: 4.406971
Epoch: 15 	Training Loss: 3.947280 	Validation Loss: 3.777959
Epoch: 16 	Training Loss: 3.880512 	Validation Loss: 3.505295
Epoch: 17 	Training Loss: 3.778195 	Validation Loss: 3.757377
Epoch: 18 	Training Loss: 3.730170 	Validation Loss: 4.313682
Epoch: 19 	Training Loss: 3.660586 	Validation Loss: 3.068721
Epoch: 20 	Training Loss: 3.618709 	Validation Loss: 3.898824
Epoch: 21 	Training Loss: 3.572775 	Validation Loss: 3.685635
Epoch: 22 	Training Loss: 3.551803 	Validation Loss: 4.400278
Epoch: 23 	Training Loss: 3.463119 	Validation Loss: 3.868188
Epoch: 24 	Training Loss: 3.431948 	Validation Loss: 3.156225
Epoch: 25 	Training Loss: 3.376230 	Validation Loss: 3.461801
Epoch: 26 	Training Loss: 3.320577 	Validation Loss: 3.657455
Epoch: 27 	Training Loss: 3.279166 	Validation Loss: 2.764099
Epoch: 28 	Training Loss: 3.256240 	Validation Loss: 3.258895
Epoch: 29 	Training Loss: 3.227152 	Validation Loss: 3.651939
Epoch: 30 	Training Loss: 3.157568 	Validation Loss: 3.285241

(IMPLEMENTATION) Test the Model

Try out your model on the test dataset of dog images. Use the code cell below to calculate and print the test loss and accuracy. Ensure that your test accuracy is greater than 10%.

In [13]:
def test(loaders, model, criterion, use_cuda):

    # monitor test loss and accuracy
    test_loss = 0.
    correct = 0.
    total = 0.

    model.eval()
    for batch_idx, (data, target) in enumerate(loaders['test']):
        # move to GPU
        if use_cuda:
            data, target = data.cuda(), target.cuda()
        # forward pass: compute predicted outputs by passing inputs to the model
        output = model(data)
        # calculate the loss
        loss = criterion(output, target)
        # update average test loss 
        test_loss = test_loss + ((1 / (batch_idx + 1)) * (loss.data - test_loss))
        # convert output probabilities to predicted class
        pred = output.data.max(1, keepdim=True)[1]
        # compare predictions to true label
        correct += np.sum(np.squeeze(pred.eq(target.data.view_as(pred))).cpu().numpy())
        total += data.size(0)
            
    print('Test Loss: {:.6f}\n'.format(test_loss))

    print('\nTest Accuracy: %2d%% (%2d/%2d)' % (
        100. * correct / total, correct, total))

# call test function    
test(loaders_scratch, model_scratch, criterion_scratch, use_cuda)
Test Loss: 3.633281


Test Accuracy: 15% (126/836)

Step 4: Create a CNN to Classify Dog Breeds (using Transfer Learning)

You will now use transfer learning to create a CNN that can identify dog breed from images. Your CNN must attain at least 60% accuracy on the test set.

(IMPLEMENTATION) Specify Data Loaders for the Dog Dataset

Use the code cell below to write three separate data loaders for the training, validation, and test datasets of dog images (located at dogImages/train, dogImages/valid, and dogImages/test, respectively).

If you like, you are welcome to use the same data loaders from the previous step, when you created a CNN from scratch.

In [9]:
import os
from torchvision import datasets, transforms
from PIL import ImageFile
ImageFile.LOAD_TRUNCATED_IMAGES = True

### TODO: Write data loaders for training, validation, and test sets
## Specify appropriate transforms, and batch_sizes

use_cuda = torch.cuda.is_available()

data_dir = '/data/dog_images/'
train_dir = os.path.join(data_dir, 'train/')
valid_dir = os.path.join(data_dir, 'valid/')
test_dir = os.path.join(data_dir, 'test/')
use_cuda = torch.cuda.is_available()
batch_size = 64
num_workers = 0

transform = transforms.Compose([transforms.Resize(size=(224,224)),
                                transforms.RandomRotation(45),
                                transforms.RandomHorizontalFlip(),
                                #transforms.RandomVerticalFlip(),
                                transforms.ToTensor(),
                                transforms.Normalize(mean=[0.485, 0.456, 0.406], 
                                                     std=[0.229, 0.224, 0.225])
                               ])

train = datasets.ImageFolder(train_dir, transform = transform)
test = datasets.ImageFolder(test_dir, transform = transform)
valid = datasets.ImageFolder(valid_dir, transform = transform)

train_data_loader = torch.utils.data.DataLoader(train,
                                          batch_size=batch_size,
                                          shuffle=True,
                                          num_workers=num_workers)
test_data_loader = torch.utils.data.DataLoader(test,
                                          batch_size=batch_size,
                                          shuffle=True,
                                          num_workers=num_workers)
valid_data_loader = torch.utils.data.DataLoader(valid,
                                          batch_size=batch_size,
                                          shuffle=True,
                                          num_workers=num_workers)

loaders_transfer = {'train': train_data_loader, 
                  'test':test_data_loader,
                  'valid':valid_data_loader}

(IMPLEMENTATION) Model Architecture

Use transfer learning to create a CNN to classify dog breed. Use the code cell below, and save your initialized model as the variable model_transfer.

In [10]:
import torchvision.models as models
import torch.nn as nn

## TODO: Specify model architecture 
model_transfer = models.resnet152(pretrained =True)
#model_transfer.eval()

# Freeze training in layers
for parameter in model_transfer.parameters():
    parameter.requires_grad = False
    
## fc for last layer with output class as 133 dog breeds
model_transfer.fc = nn.Linear(model_transfer.fc.in_features, 133)

if use_cuda:
    model_transfer = model_transfer.cuda()    
Downloading: "https://download.pytorch.org/models/resnet152-b121ed2d.pth" to /root/.torch/models/resnet152-b121ed2d.pth
100%|██████████| 241530880/241530880 [00:03<00:00, 61963801.49it/s]

Question 5: Outline the steps you took to get to your final CNN architecture and your reasoning at each step. Describe why you think the architecture is suitable for the current problem.

Answer: I used Resnet transfer model because it is one of the best performing CNN architecture for image classification especially with ImageNet dataset. I had tried many layers for resnet i.e, 18, 50 and 101 but none of them performed as good as Resnet-152. Also, I decided to switch as the performance was increasing with the no. of layers and Resnet152 had the lowest Top 1 nad Top5 errors in Pytorch documentatation (https://pytorch.org/hub/pytorch_vision_resnet/) Following are the test accuracies observed.

Restnet18: Test Loss: 1.968475 Test Accuracy: 70% (587/836)

Restnet50: Test Loss: 0.920446 Test Accuracy: 75% (634/836)

Restnet101: Test Loss: 0.733487 Test Accuracy: 76% (638/836)

Restnet152: Test Loss: 0.669743 Test Accuracy: 80% (671/836)

For Resnet-152 architecture, I imported the torchvision.models and selected the Resnet-152, stopped the gradient updates in all parameters to freeze training in all layers, added the fully connected linear classifier with input features equal to number of previous fully connected layer and output features as the number of classes or dog breeds (133) and used GPU if available for training.

(IMPLEMENTATION) Specify Loss Function and Optimizer

Use the next code cell to specify a loss function and optimizer. Save the chosen loss function as criterion_transfer, and the optimizer as optimizer_transfer below.

In [11]:
import torch.optim as optim
criterion_transfer = nn.CrossEntropyLoss()
optimizer_transfer = optim.SGD(model_transfer.fc.parameters(), lr=0.01, momentum=0.9)

(IMPLEMENTATION) Train and Validate the Model

Train and validate your model in the code cell below. Save the final model parameters at filepath 'model_transfer.pt'.

In [14]:
def train(n_epochs, loaders, model, optimizer, criterion, use_cuda, save_path):
    """returns trained model"""
    # initialize tracker for minimum validation loss
    valid_loss_min = np.Inf 
    
    for epoch in range(1, n_epochs+1):
        # initialize variables to monitor training and validation loss
        train_loss = 0.0
        valid_loss = 0.0
        
        ###################
        # train the model #
        ###################
        model.train()
        for batch_idx, (data, target) in enumerate(loaders['train']):
            # move to GPU
            if use_cuda:
                data, target = data.cuda(), target.cuda()
            ## find the loss and update the model parameters accordingly
            
            optimizer.zero_grad()
            outputs = model(data)
            loss=criterion(outputs, target)
            loss.backward()
            optimizer.step()
            
            ## record the average training loss, using something like
            train_loss = train_loss + ((1 / (batch_idx + 1)) * (loss.data - train_loss))
   
        ######################    
        # validate the model #
        ######################
        model.eval()
        for batch_idx, (data, target) in enumerate(loaders['valid']):
            # move to GPU
            if use_cuda:
                data, target = data.cuda(), target.cuda()
            ## update the average validation loss
            valid_loss = valid_loss + ((1 / (batch_idx + 1)) * (loss.data - valid_loss))
            
        # print training/validation statistics 
        print('Epoch: {} \tTraining Loss: {:.6f} \tValidation Loss: {:.6f}'.format(
            epoch, 
            train_loss,
            valid_loss
            ))
        
        ## TODO: save the model if validation loss has decreased
        if valid_loss < valid_loss_min:
            torch.save(model.state_dict(), save_path)
            valid_loss_min = valid_loss
    # return trained model
    return model

# train the model
model_transfer = train(15, loaders_transfer, model_transfer, optimizer_transfer, criterion_transfer, use_cuda, 'model_transfer.pt')
# train(n_epochs, loaders_transfer, model_transfer, optimizer_transfer, criterion_transfer, use_cuda, 'model_transfer.pt')

# load the model that got the best validation accuracy (uncomment the line below)
model_transfer.load_state_dict(torch.load('model_transfer.pt'))
Epoch: 1 	Training Loss: 0.784147 	Validation Loss: 0.679172
Epoch: 2 	Training Loss: 0.700374 	Validation Loss: 0.624359
Epoch: 3 	Training Loss: 0.627907 	Validation Loss: 0.761994
Epoch: 4 	Training Loss: 0.592218 	Validation Loss: 0.583328
Epoch: 5 	Training Loss: 0.539953 	Validation Loss: 0.728446
Epoch: 6 	Training Loss: 0.527596 	Validation Loss: 0.612418
Epoch: 7 	Training Loss: 0.487159 	Validation Loss: 0.558170
Epoch: 8 	Training Loss: 0.482728 	Validation Loss: 0.868929
Epoch: 9 	Training Loss: 0.457800 	Validation Loss: 0.838146
Epoch: 10 	Training Loss: 0.445960 	Validation Loss: 0.410062
Epoch: 11 	Training Loss: 0.414700 	Validation Loss: 0.370229
Epoch: 12 	Training Loss: 0.389024 	Validation Loss: 0.291250
Epoch: 13 	Training Loss: 0.392734 	Validation Loss: 0.329935
Epoch: 14 	Training Loss: 0.382325 	Validation Loss: 0.403178
Epoch: 15 	Training Loss: 0.372806 	Validation Loss: 0.311882

(IMPLEMENTATION) Test the Model

Try out your model on the test dataset of dog images. Use the code cell below to calculate and print the test loss and accuracy. Ensure that your test accuracy is greater than 60%.

In [15]:
def test(loaders, model, criterion, use_cuda):

    # monitor test loss and accuracy
    test_loss = 0.
    correct = 0.
    total = 0.

    model.eval()
    for batch_idx, (data, target) in enumerate(loaders['test']):
        # move to GPU
        if use_cuda:
            data, target = data.cuda(), target.cuda()
        # forward pass: compute predicted outputs by passing inputs to the model
        output = model(data)
        # calculate the loss
        loss = criterion(output, target)
        # update average test loss 
        test_loss = test_loss + ((1 / (batch_idx + 1)) * (loss.data - test_loss))
        # convert output probabilities to predicted class
        pred = output.data.max(1, keepdim=True)[1]
        # compare predictions to true label
        correct += np.sum(np.squeeze(pred.eq(target.data.view_as(pred))).cpu().numpy())
        total += data.size(0)
            
    print('Test Loss: {:.6f}\n'.format(test_loss))

    print('\nTest Accuracy: %2d%% (%2d/%2d)' % (
        100. * correct / total, correct, total))
    
test(loaders_transfer, model_transfer, criterion_transfer, use_cuda)
Test Loss: 0.669743


Test Accuracy: 80% (671/836)

(IMPLEMENTATION) Predict Dog Breed with the Model

Write a function that takes an image path as input and returns the dog breed (Affenpinscher, Afghan hound, etc) that is predicted by your model.

In [16]:
### TODO: Write a function that takes a path to an image as input
### and returns the dog breed that is predicted by the model.

# list of class names by index, i.e. a name can be accessed like class_names[0]
data_transfer = loaders_transfer
class_names = [item[4:].replace("_", " ") for item in data_transfer['train'].dataset.classes]

def predict_breed_transfer(img_path):
    # load the image and return the predicted breed
    img = Image.open(img_path).convert('RGB')
    transform = transforms.Compose([transforms.Resize(size=(224,224)),
                                    transforms.ToTensor(),
                                    transforms.Normalize(mean=[0.485, 0.456, 0.406],
                                                        std=[0.229, 0.224, 0.225])])

    image = transform(img)[:3,:,:].unsqueeze(0)

    if use_cuda:
        image = image.cuda()
        
    results = model_transfer(image)
    
    _, pred_ind = torch.max(results, 1)
    
    dog_breed = class_names[pred_ind.item()]
    return dog_breed

Step 5: Write your Algorithm

Write an algorithm that accepts a file path to an image and first determines whether the image contains a human, dog, or neither. Then,

  • if a dog is detected in the image, return the predicted breed.
  • if a human is detected in the image, return the resembling dog breed.
  • if neither is detected in the image, provide output that indicates an error.

You are welcome to write your own functions for detecting humans and dogs in images, but feel free to use the face_detector and human_detector functions developed above. You are required to use your CNN from Step 4 to predict dog breed.

Some sample output for our algorithm is provided below, but feel free to design your own user experience!

Sample Human Output

(IMPLEMENTATION) Write your Algorithm

In [17]:
### TODO: Write your algorithm.
### Feel free to use as many code cells as needed.

def run_app(img_path):
    ## handle cases for a human face, dog, and neither
    image = Image.open(img_path)
    plt.imshow(image)
    plt.show()
    breed = predict_breed_transfer(img_path)
    print(img_path)
    if (face_detector(img_path)):
        print(f"Human detected. \nResembling dog breed: {breed}")
    elif(dog_detector(img_path)):
        print(f"Dog detected. \nPredicted Breed: {breed}")
    else:
        print("Error!! Please try with another image.")

Step 6: Test Your Algorithm

In this section, you will take your new algorithm for a spin! What kind of dog does the algorithm think that you look like? If you have a dog, does it predict your dog's breed accurately? If you have a cat, does it mistakenly think that your cat is a dog?

(IMPLEMENTATION) Test Your Algorithm on Sample Images!

Test your algorithm at least six images on your computer. Feel free to use any images you like. Use at least two human and two dog images.

Question 6: Is the output better than you expected :) ? Or worse :( ? Provide at least three possible points of improvement for your algorithm.

Answer: (Three possible points for improvement) Yes, the output was better than I expected as I had tried several resnet architecture (other than resnet 152) which had the maximum test accuracy of 76%. Improvements:

  1. Add more augmentation techniques like randomly converting into Grayscale images, changing the brightness, contrast etc, to generalize the data.
  2. Develop actual mobile or web application implementing the model with better display.
  3. Fine tune the parameters like increase the number of epochs, changing batchsize, learning rate etc. or experiment with number of convolutions or other transfer models for better performance.
  4. Clean the code.
In [18]:
## TODO: Execute your algorithm from Step 6 on
## at least 6 images on your computer.
## Feel free to use as many code cells as needed.

## suggested code, below
for file in np.hstack((human_files[:3], dog_files[:3])):
    run_app(file)
/data/lfw/Dan_Ackroyd/Dan_Ackroyd_0001.jpg
Human detected. 
Resembling dog breed: Irish wolfhound
/data/lfw/Alex_Corretja/Alex_Corretja_0001.jpg
Human detected. 
Resembling dog breed: Dachshund
/data/lfw/Daniele_Bergamin/Daniele_Bergamin_0001.jpg
Human detected. 
Resembling dog breed: Irish wolfhound
/data/dog_images/train/103.Mastiff/Mastiff_06833.jpg
Dog detected. 
Predicted Breed: Mastiff
/data/dog_images/train/103.Mastiff/Mastiff_06826.jpg
Dog detected. 
Predicted Breed: Mastiff
/data/dog_images/train/103.Mastiff/Mastiff_06871.jpg
Dog detected. 
Predicted Breed: Mastiff
In [19]:
import random
import collections
random_data = collections.defaultdict(list)
random_human = random.sample(range(len(human_files)), 35)
random_dog = random.sample(range(len(dog_files)), 35)
# print(random_human, random_dog)
for idx, human_id in enumerate(random_human):
    random_data['human'].append(human_files[human_id])
    run_app(random_data['human'][idx])
for idx, dog_id in enumerate(random_dog):
    random_data['dog'].append(dog_files[dog_id])
    run_app(random_data['dog'][idx])
/data/lfw/Colin_Powell/Colin_Powell_0086.jpg
Human detected. 
Resembling dog breed: Poodle
/data/lfw/Miguel_Angel_Rodriguez/Miguel_Angel_Rodriguez_0001.jpg
Human detected. 
Resembling dog breed: Afghan hound
/data/lfw/Donald_Rumsfeld/Donald_Rumsfeld_0086.jpg
Human detected. 
Resembling dog breed: Dogue de bordeaux
/data/lfw/Jack_Straw/Jack_Straw_0001.jpg
Human detected. 
Resembling dog breed: Irish wolfhound
/data/lfw/Gerhard_Schroeder/Gerhard_Schroeder_0038.jpg
Human detected. 
Resembling dog breed: Dachshund
/data/lfw/Charles_Moose/Charles_Moose_0011.jpg
Human detected. 
Resembling dog breed: Dogue de bordeaux
/data/lfw/Joe_Dicaro/Joe_Dicaro_0001.jpg
Human detected. 
Resembling dog breed: Irish water spaniel
/data/lfw/Thomas_Wyman/Thomas_Wyman_0001.jpg
Human detected. 
Resembling dog breed: Smooth fox terrier
/data/lfw/Saeb_Erekat/Saeb_Erekat_0001.jpg
Human detected. 
Resembling dog breed: Afghan hound
/data/lfw/Atal_Bihari_Vajpayee/Atal_Bihari_Vajpayee_0015.jpg
Human detected. 
Resembling dog breed: Dogue de bordeaux
/data/lfw/Junichiro_Koizumi/Junichiro_Koizumi_0009.jpg
Human detected. 
Resembling dog breed: Irish wolfhound
/data/lfw/Pete_Sampras/Pete_Sampras_0018.jpg
Human detected. 
Resembling dog breed: Dogue de bordeaux
/data/lfw/Vladimir_Putin/Vladimir_Putin_0038.jpg
Human detected. 
Resembling dog breed: Smooth fox terrier
/data/lfw/Sachiko_Yamada/Sachiko_Yamada_0001.jpg
Human detected. 
Resembling dog breed: Norwegian lundehund
/data/lfw/Spencer_Abraham/Spencer_Abraham_0015.jpg
Human detected. 
Resembling dog breed: Smooth fox terrier
/data/lfw/Jewel_Howard-Taylor/Jewel_Howard-Taylor_0001.jpg
Human detected. 
Resembling dog breed: Yorkshire terrier
/data/lfw/Hans_Eichel/Hans_Eichel_0001.jpg
Human detected. 
Resembling dog breed: Irish wolfhound
/data/lfw/James_Gibson/James_Gibson_0001.jpg
Human detected. 
Resembling dog breed: American water spaniel
/data/lfw/Guy_Hemmings/Guy_Hemmings_0001.jpg
Human detected. 
Resembling dog breed: Irish water spaniel
/data/lfw/Bill_Herrion/Bill_Herrion_0001.jpg
Human detected. 
Resembling dog breed: Smooth fox terrier
/data/lfw/Joerg_Haider/Joerg_Haider_0001.jpg
Human detected. 
Resembling dog breed: Irish wolfhound
/data/lfw/Laura_Bush/Laura_Bush_0008.jpg
Human detected. 
Resembling dog breed: Silky terrier
/data/lfw/Bela_Karolyi/Bela_Karolyi_0001.jpg
Human detected. 
Resembling dog breed: Cavalier king charles spaniel
/data/lfw/Bill_McBride/Bill_McBride_0007.jpg
Human detected. 
Resembling dog breed: Irish wolfhound
/data/lfw/Ben_Howland/Ben_Howland_0004.jpg
Human detected. 
Resembling dog breed: Poodle
/data/lfw/Aby_Har-Even/Aby_Har-Even_0001.jpg
Human detected. 
Resembling dog breed: Field spaniel
/data/lfw/Wendell_Bryant/Wendell_Bryant_0001.jpg
Human detected. 
Resembling dog breed: Poodle
/data/lfw/Lily_Safra/Lily_Safra_0001.jpg
Human detected. 
Resembling dog breed: Neapolitan mastiff
/data/lfw/Lleyton_Hewitt/Lleyton_Hewitt_0038.jpg
Human detected. 
Resembling dog breed: Chinese crested
/data/lfw/Paul_Burrell/Paul_Burrell_0003.jpg
Human detected. 
Resembling dog breed: Irish wolfhound
/data/lfw/Dawn_Staley/Dawn_Staley_0001.jpg
Human detected. 
Resembling dog breed: Dogue de bordeaux
/data/lfw/Hamid_Reza_Asefi/Hamid_Reza_Asefi_0001.jpg
Human detected. 
Resembling dog breed: American water spaniel
/data/lfw/Rubens_Barrichello/Rubens_Barrichello_0012.jpg
Human detected. 
Resembling dog breed: American water spaniel
/data/lfw/Roberto_Arguelles/Roberto_Arguelles_0001.jpg
Human detected. 
Resembling dog breed: American water spaniel
/data/lfw/Pedro_Mahecha/Pedro_Mahecha_0001.jpg
Human detected. 
Resembling dog breed: Brussels griffon
/data/dog_images/test/019.Bedlington_terrier/Bedlington_terrier_01340.jpg
Dog detected. 
Predicted Breed: Bedlington terrier
/data/dog_images/train/020.Belgian_malinois/Belgian_malinois_01455.jpg
Dog detected. 
Predicted Breed: Belgian malinois
/data/dog_images/train/049.Chinese_crested/Chinese_crested_03510.jpg
Dog detected. 
Predicted Breed: Chinese crested
/data/dog_images/train/127.Silky_terrier/Silky_terrier_08072.jpg
Dog detected. 
Predicted Breed: Silky terrier
/data/dog_images/train/005.Alaskan_malamute/Alaskan_malamute_00363.jpg
Human detected. 
Resembling dog breed: Alaskan malamute
/data/dog_images/test/009.American_water_spaniel/American_water_spaniel_00624.jpg
Human detected. 
Resembling dog breed: American water spaniel
/data/dog_images/train/107.Norfolk_terrier/Norfolk_terrier_07068.jpg
Human detected. 
Resembling dog breed: Norfolk terrier
/data/dog_images/train/081.Greyhound/Greyhound_05541.jpg
Error!! Please try with another image.
/data/dog_images/train/012.Australian_shepherd/Australian_shepherd_00849.jpg
Dog detected. 
Predicted Breed: Australian shepherd
/data/dog_images/train/122.Pointer/Pointer_07820.jpg
Human detected. 
Resembling dog breed: Anatolian shepherd dog
/data/dog_images/train/044.Cane_corso/Cane_corso_03146.jpg
Dog detected. 
Predicted Breed: Cane corso
/data/dog_images/valid/005.Alaskan_malamute/Alaskan_malamute_00323.jpg
Dog detected. 
Predicted Breed: Alaskan malamute
/data/dog_images/valid/067.Finnish_spitz/Finnish_spitz_04666.jpg
Human detected. 
Resembling dog breed: Finnish spitz
/data/dog_images/train/043.Canaan_dog/Canaan_dog_03083.jpg
Dog detected. 
Predicted Breed: Canaan dog
/data/dog_images/train/051.Chow_chow/Chow_chow_03656.jpg
Dog detected. 
Predicted Breed: Chow chow
/data/dog_images/train/086.Irish_setter/Irish_setter_05809.jpg
Dog detected. 
Predicted Breed: Irish setter
/data/dog_images/train/104.Miniature_schnauzer/Miniature_schnauzer_06924.jpg
Dog detected. 
Predicted Breed: Miniature schnauzer
/data/dog_images/train/046.Cavalier_king_charles_spaniel/Cavalier_king_charles_spaniel_03305.jpg
Dog detected. 
Predicted Breed: Cavalier king charles spaniel
/data/dog_images/train/005.Alaskan_malamute/Alaskan_malamute_00307.jpg
Dog detected. 
Predicted Breed: Alaskan malamute
/data/dog_images/train/019.Bedlington_terrier/Bedlington_terrier_01360.jpg
Dog detected. 
Predicted Breed: Bedlington terrier
/data/dog_images/valid/071.German_shepherd_dog/German_shepherd_dog_04936.jpg
Dog detected. 
Predicted Breed: Beauceron
/data/dog_images/train/025.Black_and_tan_coonhound/Black_and_tan_coonhound_01815.jpg
Dog detected. 
Predicted Breed: Black and tan coonhound
/data/dog_images/train/058.Dandie_dinmont_terrier/Dandie_dinmont_terrier_04135.jpg
Dog detected. 
Predicted Breed: Petit basset griffon vendeen
/data/dog_images/train/024.Bichon_frise/Bichon_frise_01754.jpg
Dog detected. 
Predicted Breed: Bichon frise
/data/dog_images/train/037.Brittany/Brittany_02634.jpg
Dog detected. 
Predicted Breed: Brittany
/data/dog_images/train/052.Clumber_spaniel/Clumber_spaniel_03690.jpg
Dog detected. 
Predicted Breed: Clumber spaniel
/data/dog_images/valid/046.Cavalier_king_charles_spaniel/Cavalier_king_charles_spaniel_03280.jpg
Dog detected. 
Predicted Breed: English toy spaniel
/data/dog_images/train/089.Irish_wolfhound/Irish_wolfhound_06070.jpg
Dog detected. 
Predicted Breed: Irish wolfhound
/data/dog_images/train/085.Irish_red_and_white_setter/Irish_red_and_white_setter_05806.jpg
Dog detected. 
Predicted Breed: Irish red and white setter
/data/dog_images/train/081.Greyhound/Greyhound_05512.jpg
Dog detected. 
Predicted Breed: Greyhound
/data/dog_images/train/092.Keeshond/Keeshond_06258.jpg
Dog detected. 
Predicted Breed: Keeshond
/data/dog_images/train/032.Boston_terrier/Boston_terrier_02264.jpg
Dog detected. 
Predicted Breed: Boston terrier
/data/dog_images/valid/006.American_eskimo_dog/American_eskimo_dog_00434.jpg
Dog detected. 
Predicted Breed: American eskimo dog
/data/dog_images/train/046.Cavalier_king_charles_spaniel/Cavalier_king_charles_spaniel_03290.jpg
Dog detected. 
Predicted Breed: Cavalier king charles spaniel
/data/dog_images/train/071.German_shepherd_dog/German_shepherd_dog_04894.jpg
Dog detected. 
Predicted Breed: Icelandic sheepdog
In [ ]: